Error 00000002 00000005 Initializing Io Driver
LINK >>> https://urluso.com/2te6CK
Freeing unused kernel memory: 248K (c0861000 - c089f000)Failed to execute /init (error -8)Bad trap at PC: 101063d0, SR: 2d000, vector=2020linuxrc[1]: unhandled signal 5 at 00000000 nip 101063d0 lr 101066b0 code 0Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000005
I had to create a 64-bit DSN and use the 64-bit driver 'Microsoft Access dBASE Driver' where I was trying to use a 32-bit driver 'Microsoft dBase Driver' with a 32-bit DSN which gave mismatch between Driver and Application error, this can be seen in:
U-Boot 1.1.3 (Nov 19 2018 - 11:11:36)Board: Ralink APSoC DRAM: 64 MBrelocate_code Pointer at: 83fb4000enable ephy clock...done. rf reg 29 = 5SSC disabled.spi_wait_nsec: 29spi device id: c8 40 17 c8 40 (4017c840)Warning: un-recognized chip ID, please update bootloader!============================================Ralink UBoot Version: 5.0.0.0--------------------------------------------ASIC 7620_MP (Port5GigaSW)DRAM component: 512 Mbits DDR, width 16DRAM bus: 16 bitTotal memory: 64 MBytesFlash component: SPI FlashDate:Nov 19 2018 Time:11:11:36============================================icache: sets:512, ways:4, linesz:32 ,total:65536dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 580 MHZ #### estimate memory size =64 Mbytesrt_rtl8367_init(1705):BeginWait for RTL8367C Ready.RTL8367C is ready now!rt_rtl8367_init(1749):Call Func rt_rtl8367_enableRgmii()continue to starting system. 0disable switch forward...3: System Boot system code via Flash.(0xbc020000)do_bootm:argc=2, addr=0xbc020000## Booting image at bc020000 ... Uncompressing Kernel Image ... OKNo initrd## Transferring control to Linux (at address 804799e0) ...## Giving linux memsize in MB, 64Starting kernel ...LINUX started... THIS IS ASICSDK 5.0.S.0Linux version 3.10.14 (root@cxg) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 Mon Nov 19 11:16:02 CST 2018 The CPU feqenuce set to 580 MHz PCIE: bypass PCIe DLL. PCIE: Elastic buffer control: Addr:0x68 -> 0xB4 disable all power about PCIeCPU0 revision is: 00019650 (MIPS 24KEc)Software DMA cache coherencyDetermined physical RAM map: memory: 04000000 @ 00000000 (usable)Initrd not found or empty - disabling initrdZone ranges: Normal [mem 0x00000000-0x03ffffff]Movable zone start for each nodeEarly memory node ranges node 0: [mem 0x00000000-0x03ffffff]Primary instruction cache 64kB, 4-way, VIPT, linesize 32 bytes.Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytesBuilt 1 zonelists in Zone order, mobility grouping on. Total pages: 16256Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock2 rootfstype=squashfsPID hash table entries: 256 (order: -2, 1024 bytes)Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)Writing ErrCtl register=0000cd83Readback ErrCtl register=0000cd83Memory: 58476k/65536k available (4621k kernel code, 7060k reserved, 1159k data, 296k init, 0k highmem)NR_IRQS:128console [ttyS1] enabledCalibrating delay loop... 385.02 BogoMIPS (lpj=770048)pid_max: default: 4096 minimum: 301Mount-cache hash table entries: 512ftrace: allocating 13580 entries in 27 pagesNET: Registered protocol family 16RALINK_GPIOMODE = 1ab41dRALINK_GPIOMODE = 18b41dPPLL_CFG1=0xe7c000MT7620 PPLL lockPPLL_DRV =0x80080504start PCIe register accessRALINK_RSTCTRL = 2400000RALINK_CLKCFG1 = 75afffc0*************** MT7620 PCIe RC mode *************PCIE0 enabledPort 0 N_FTS = 1b105000init_rt2880pci donebio: create slab at 0PCI host bridge to bus 0000:00pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]pci_bus 0000:00: root bus resource [io 0x10160000-0x1016ffff]pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguringpci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]pci 0000:00:00.0: PCI bridge to [bus 01]pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]BAR0 at slot 0 = 0bus=0x0, slot = 0x0res[0]->start = 0res[0]->end = 0res[1]->start = 20200000res[1]->end = 2020ffffres[2]->start = 0res[2]->end = 0res[3]->start = 0res[3]->end = 0res[4]->start = 0res[4]->end = 0res[5]->start = 0res[5]->end = 0bus=0x1, slot = 0x0res[0]->start = 20000000res[0]->end = 200fffffres[1]->start = 0res[1]->end = 0res[2]->start = 0res[2]->end = 0res[3]->start = 0res[3]->end = 0res[4]->start = 0res[4]->end = 0res[5]->start = 0res[5]->end = 0Switching to clocksource MIPSNET: Registered protocol family 2TCP established hash table entries: 512 (order: 0, 4096 bytes)TCP bind hash table entries: 512 (order: -1, 2048 bytes)TCP: Hash tables configured (established 512 bind 512)TCP: reno registeredUDP hash table entries: 256 (order: 0, 4096 bytes)UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)NET: Registered protocol family 1Load Ralink Timer0 ModuleLoad Ralink Timer1 ModuleMTK/Ralink EHCI/OHCI init.squashfs: version 4.0 (2009/01/31) Phillip LougherNTFS driver 2.1.30 [Flags: R/W].fuse init (API version 7.22)msgmni has been set to 114io scheduler noop registered (default)Serial: 8250/16550 driver, 4 ports, IRQ sharing enabledserial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550Aserial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550ARalink gpio driver initializedbrd: module loadeddeice id : c8 40 17 c8 40 (4017c840)Warning: un-recognized chip ID, please update SPI driver!GD25Q64B(c8 40170000) (8192 Kbytes)mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0Creating 7 MTD partitions on \"raspi\":0x000000000000-0x000000020000 : \"boot\"0x000000020000-0x000000220000 : \"kernel\"0x000000220000-0x0000007c0000 : \"rootfs\"mtd: partition \"rootfs\" set to be root filesystem0x0000007c0000-0x0000007d0000 : \"config\"0x0000007d0000-0x0000007e0000 : \"romfile\"0x0000007e0000-0x0000007f0000 : \"ispconfig\"0x0000007f0000-0x000000800000 : \"radio\"Register flash device:flash0PPP generic driver version 2.4.2PPP MPPE Compression module registeredNET: Registered protocol family 24register rt2860WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20aRtmpChipOpsEepromHook::e2p_type=2, inf_Type=5NVM is FLASH mode (pAd->flash_offset = 0x7f8000)get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rairdm_major = 253spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6Read MAC from flash( 7df100) ffffffd8-0d-17-xx-xx-ffffffxxnetif_napi_add() called with weight 128 on device eth0SMACCR1 -- : 0x0000d80dSMACCR0 -- : 0x17xxxxxxRalink APSoC Ethernet Driver Initilization. v3.1 512 rx/tx descriptors allocated, mtu = 1500!NAPI enable, Tx Ring = 512, Rx Ring = 512spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6Read MAC from flash( 7df100) ffffffd8-0d-17-xx-xx-ffffffxxSMACCR1 -- : 0x0000d80dSMACCR0 -- : 0x17xxxxxxPROC INIT OK!Mirror/redirect action onu32 classifier Performance counters on input device check on Actions configuredNetfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (913 buckets, 3652 max)gre: GRE over IPv4 demultiplexor driverip_tables: (C) 2000-2006 Netfilter Core TeamType=LinuxTCP: cubic registeredNET: Registered protocol family 10ip6_tables: (C) 2000-2006 Netfilter Core Teamsit: IPv6 over IPv4 tunneling driverNET: Registered protocol family 17Ebtables v2.0 registered8021q: 802.1Q VLAN Support v1.8registered taskstats version 1VFS: Mounted root (squashfs filesystem) readonly on device 31:2.Freeing unused kernel memory: 296K (805a6000 - 805f0000)starting pid 713, tty '': '/etc/init.d/rcS'SCSI subsystem initializedusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverehci-platform: EHCI generic platform driverehci-platform ehci-platform: EHCI Host Controllerehci-platform ehci-platform: new USB bus registered, assigned bus number 1ehci-platform ehci-platform: irq 18, io mem 0x101c0000ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00hub 1-0:1.0: USB hub foundhub 1-0:1.0: 1 port detectedohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driverohci-platform ohci-platform: Generic Platform OHCI Controllerohci-platform ohci-platform: new USB bus registered, assigned bus number 2ohci-platform ohci-platform: irq 18, io mem 0x101c1000hub 2-0:1.0: USB hub foundhub 2-0:1.0: 1 port detectedusbcore: registered new interface driver usb-storagetp_domain init okPPTP driver version 0.8.5l2tp_core: L2TP core driver, V2.0l2tp_ppp: PPPoL2TP kernel driver, V2.0Please press Enter to activate this console. [ ipt_init ] cmd: /var/tmp/dconf/rc.router[ dm_readFile ] 2193: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xmlspiflash_ioctl_read, Read from 0x007c0000 length 0x10000, ret 0, retlen 0x10000spiflash_ioctl_read, Read from 0x007c0000 length 0x948a, ret 0, retlen 0x948a===>Enter routerspiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6 modespiflash_ioctl_read, Read from 0x007df500 length 0x29, ret 0, retlen 0x29spiflash_ioctl_read, Read from 0x007df600 length 0x21, ret 0, retlen 0x21spiflash_ioctl_read, Read from 0x007df700 length 0x10, ret 0, retlen 0x10spiflash_ioctl_read, Read from 0x007df200 length 0x4, ret 0, retlen 0x4spiflash_ioctl_read, Read from 0x00020000 length 0x200, ret 0, retlen 0x200[ rsl_initDevInfo ] cmd: echo 0 > /proc/tplink/mspiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6anufacture_flag[ rsl_getManagementServerObj ] 492: cannot set connectionRequestURL yet because no WAN intf is up[ rsl_getManagementServerObj ] 492: cannot set connectionRequestURL yet because no WAN intf is up[ rsl_getManagementServerObj ] 492: cannot set connectionRequestURL yet because no WAN intf is up[ tr143_main ] 162: 909 start select, maxFd: 7, msgFd.fd: 5, compFd: 7sendto: No such file or directorypid 786 send 2001 error[ oal_startDynDns ] cmd: dyndns /var/tmp/dconf/dyndns.conf[ oal_startNoipDns ] cmd: noipdns /var/tmp/dconf/noipdns.conf[ oal_vlan_fetchState ] 351: Failed to read VLAN file.ioctl: No such device[ oal_br_addBridge ] cmd: brctl addbr br0[ oal_br_addBridge ] cmd: brctl setfd br0 0[ oal_br_addBridge ] cmd: brctl stp br0 off[ oal_ipt_addLanRules ] cmd: iptables -t filter -A INPUT -i br+ -j ACCEPT[ oal_intf_setIntf ] cmd: ifconfig br0 192.168.0use br_hw_addr!.1 netmask 255.255.255.0 up[ oal_util_setProcLanAddr ] cmd: echo \"br0 16820416,\" > /proc/net/c 0: 0: C:4C: 5:FFFFFF80onntract_LocalAdRaeth v3.1 (dr[ oal_intf_eNAPInableIntf ] cmd:,SkbRecycle ifconfig eth0 u)pphy_tx_ring = 0x02d28000, tx_ring = 0xa2d28000phy_rx_ring0 = 0x02d2a000, rx_ring0 = 0xa2d2a000RTL8367C is ready now!SMACCR1 -- : 0x0000d80dSMACCR0 -- : 0x17xxxxxxESW: Link Status Changed - Port5 Link UPCDMA_CSG_CFG = 81000000GDMA1_FWD_CFG = 20710000[ oal_intf_enableIntf ] cmd: ifconfig eth0.3 upifconfig: ioctl 0x8913 failed: No such device[ oal_intf_enableIntf ] cmd: ifconfig eth0.4 upifconfig: ioctl 0x8913 failed: No such device[ oal_intf_enableIntf ] cmd: ifconfig eth0.5 upifconfig: ioctl 0x8913 failed: No such device[ oal_intf_enableIntf ] cmd: ifconfig eth0.6 upifconfig: ioctl 0x8913 failed: No such device[ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6][ oal_addVlanTagIntf ] cmd: vconfig add eth0 3[ oal_intf_enableIntf ] cmd: ifconfig eth0.3 upset if eth0.3 to *not wan dev[ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up[ oal_addVlanTagIntf ] cmd: vconfig add eth0 4[ oal_intf_enableIntf ] cmd: ifconfig eth0.4 upset if eth0.4 to *not wan dev[ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down[ oal_addVlanTagIntf ] cmd: vconfig add eth0 5[ oal_intf_enableIntf ] cmd: ifconfig eth0.5 upset if eth0.5 to *not wan dev[ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down[ oal_addVlanTagIntf ] cmd: vconfig add eth0 6[ oal_intf_enableIntf ] cmd: ifconfig eth0.6 upset if eth0.6 to *not wan dev[ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down[ oal_addVlanTagIntf ] cmd: vconfig add eth0 2[ oal_intf_enableIntf ] cmd: ifconfig eth0.2 upset if eth0.2 to wan dev[ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.3brctl: bridge br0: Invalid argument[ oal_intf_enableIntf ]device eth0.3 entered promiscuous mode cmd: ifconfig edevice eth0 entered promiscuous modeth0.3 up[ oal_br0: port 1(eth0.3) entered forwarding statebr_addIntfIntoBrbr0: port 1(eth0.3) entered forwarding stateidge ] cmd: brctl addif br0 eth0.3[ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6][ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up[ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down[ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.4brctl: bridge br0: Invalid argument[ oal_intf_enableIntf ] cmd: ifconfig eth0.4 updevice eth0.4 entered promiscuous mode[ oal_br_addIntfbr0: port 2(eth0.4) entered forwarding stateIntoBridge ] cmdbr0: port 2(eth0.4) entered forwarding state: brctl addif br0 eth0.4[ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3][ rsl_getUnubr0: port 2(eth0.4) entered disabled statesedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6][ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up[ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down[ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.5brctl: bridge br0: Invalid argument[ oal_intf_enableIntf ] cmd: ifconfig eth0.5 updevice eth0.5 entered promiscuous mode[ oal_br_addIntfbr0: port 3(eth0.5) entered forwarding stateIntoBridge ] cmdbr0: port 3(eth0.5) entered forwarding state: brctl addif br0 eth0.5[ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4][ br0: port 3(eth0.5) entered disabled statersl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6][ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up[ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down[ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.6brctl: bridge br0: Invalid argument[ oal_intf_enableIntf ] cmd: ifconfig eth0.6 updevice eth0.6 entered promiscuous mode[ oal_br_addIntfbr0: port 4(eth0.6) entered forwarding stateIntoBridge ] cmdbr0: port 4(eth0.6) entered forwarding state: brctl addif br0 eth0.6[ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3br0: port 4(eth0.6) entered disabled state : [5][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6][ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up[ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down[ oal_eth_setIGMPSnoopParam ] cmd: sh /etc/igmp/igmp_snoop.sh 1[ oal_eth_setIGMPSnoopParam ] cmd: echo 1 > /proc/tplink/eth_igmp_snooping[ oal_wlan_ra_setCountryRegion ] cmd: cp /etc/SingleSKU.dat /var/Wireless/RT2860AP/SingleSKU.dat[ oal_wlan_ra_setCountryRegion ] cmd: iwpriv ra0 set CountryRegion=1ra0 no private ioctls.[ oal_wlan_ra_loadDriver ] cmd: insmod /lib/modules/kmdir/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig apcli0 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra1 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra2 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra3 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra4 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra0 down[ oal_wlan_ra_initWlan ] cmd: ifconfig ra0 upstart ch = 1, ch->num = 228 28 28 2828 28 28 28 28 28 28 2828 28 28 28 28 28 28 28 28 28 28 28 28 28 28 280 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0start ch = 3, ch->num = 928 28 28 2828 28 28 28 28 28 28 2828 28 28 28 28 28 28 28 28 28 28 28 28 28 28 2828 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28start ch = 12, ch->num = 228 28 28 2828 28 28 28 28 28 28 2828 28 28 28 28 28 28 28 28 28 28 28 28 28 28 280 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0start ch = 14, ch->num = 128 28 28 280 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0exec!spiflash_ioctl_read, Read from 0x007f0000 length 0x200, ret 0, retlen 0x200eeFlashId = 0x7620!open DNS error: No such file or directory[ oal_sys_getOldTZInfo ] 462: Open TZ file error![ oal_sys_unsetTZ ] cmd: echo \"\" > /etc/TZ[ oal_sys_unsetTZ ] cmd: echo \"\" > /etc/TZ0x1300 = 00064320[ oal_wlan_controlWlanLed ] cmd: echo \"1\" > /proc/tplink/led_wlan_24G[ oal_wlan_ra_closeVap ] cmd: ifconfig ra0 down[ oal_wlan_ra_closeVap ] cmd: echo 0 > /proc/tplink/led_wlan_24G[ oal_wlan_ra_closeVap ] cmd: killall -q wscd[ oal_wlan_ra_closeVap ] cmd: killall -q -SIGINT rt2860apd[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice ra0 entered promiscuous mode0 ra0[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice apcli0 entered promiscuous mode0 apcli0[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice ra2 entered promiscuous mode0 ra2[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice ra3 entered promiscuous mode0 ra3[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice ra4 entered promiscuous mode0 ra4[ wlan_handleL2Desc ] 2401: br0[ oal_br_addIndevice ra1 entered promiscuous modetfIntoBridge ] cmd: brctl addif br0 ra1[ oal_wlan_ra_initEnd ] cmd: wlNetlinkTool &WLAN-Start wlNetlinkToolWaiting for Wireless Events from interfaces...swWlanChkAhbErr: netlink to do[ oal_wlan_ra_setCountryRegion ] cmd: cp /etc/SingleSKU_5G.dat /var/Wireless/RT2860AP/SingleSKU_5G.dat[ oal_wlan_ra_setCountryRegion ] cmd: iwpriv rai0 set CountryRegionABand=1Interface doesn't accept private ioctl...set (8BE2): Network is down[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig apclii0 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai1 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai2 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai3 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai4 downifconfig: ioctl 0x8913 failed: No such device[ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai0 down[ oal_wlan_ra_initWlan ] cmd: ifconfig rai0 upbuild time =20141115060606arom patch for E3 ICplatform =ALPShw/sw version =patch version =FW Version:0.0.00 Build:1Build Time:201507311614____fw for E3 ICspiflash_ioctl_read, Read from 0x007f8000 length 0x200, ret 0, retlen 0x200==============eeFlashId: 30306 ====================RX[0] DESC a3ffe000 size = 4096RX[1] DESC a3fff000 size = 4096E2pAccessMode=2cfg_mode=14cfg_mode=14APSDCapable[0]=0APSDCapable[1]=0APSDCapable[2]=0APSDCapable[3]=0APSDCapable[4]=0APSDCapable[5]=0APSDCapable[6]=0APSDCapable[7]=0APSDCapable[8]=0APSDCapable[9]=0APSDCapable[10]=0APSDCapable[11]=0APSDCapable[12]=0APSDCapable[13]=0APSDCapable[14]=0APSDCapable[15]=0default ApCliAPSDCapable[0]=0pAd->ed_threshold = 90pAd->ed_chk = 0pAd->ed_false_cca_threshold = 250Key1Str is Invalid key length(0) or Type(0)Key1Str is Invalid key length(0) or Type(0)Key1Str is Invalid key length(0) or Type(0)Key1Str is Invalid key length(0) or Type(0)Key2Str is Invalid key length(0) or Type(0)Key2Str is Invalid key length(0) or Type(0)Key2Str is Invalid key length(0) or Type(0)Key2Str is Invalid key length(0) or Type(0)Key3Str is Invalid key length(0) or Type(0)Key3Str is Invalid key length(0) or Type(0)Key3Str is Invalid key length(0) or Type(0)Key3Str is Invalid key length(0) or Type(0)Key4Str is Invalid key length(0) or Type(0)Key4Str is Invalid key length(0) or Type(0)Key4Str is Invalid key length(0) or Type(0)Key4Str is Invalid key length(0) or Type(0)APCli_WPAPSK_KEY, key string required 8 64 characters!!!I/F(apcli0) Key1Str is Invalid key length!I/F(apcli0) Key2Str is Invalid key length!I/F(apcli0) Key3Str is Invalid key length!I/F(apcli0) Key4Str is Invalid key length!1. Phy Mode = 49spiflash_ioctl_read, Read from 0x007f8000 length 0x200, ret 0, retlen 0x200==============eeFlashId: 30306 ====================get_chl_grp:illegal channel (167)get_chl_grp:illegal channel (167)get_chl_grp:illegal channel (169)get_chl_grp:illegal channel (169)get_chl_grp:illegal channel (171)get_chl_grp:illegal channel (171)Country Region from e2p = ffffmt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=1, temp_tx_alc_enable=1mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0mt76x2_get_external_lna_gain::LNA type=0x1, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8c, ALNAGain1=0xffffff8c, ALNAGain2=0xffffff8c2. Phy Mode = 493. Phy Mode = 49andes_pci_fw_init0x1300 = 00073200AntCfgInit: primary/secondary ant 0/1andes_load_cr:cr_type(2)ChipStructAssign(): MT76x2 hook !MCS Set = ff ff 00 00 01mt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043emt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043emt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043emt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043emt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400mt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043eAPStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8@@@ ed_monitor_init : ===>@@@ ed_monitor_init : @@@ ed_monitor_exit : rlt_wlan_chip_onoff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0x20b, Reg-WlanFunCtrl=0x20bRTMP_TimerListRelease: release timer obj c0191338!RTMP_TimerListRelease: release timer obj c0294fb4!RTMP_TimerListRelease: release timer obj c021a4f0!RTMP_TimerListRelease: release timer obj c021a4c4!RTMP_TimerListRelease: release timer obj c021a51c!RTMP_TimerListRelease: release timer obj c021a498!RTMP_TimerListRelease: release timer obj c01953bc!RTMP_TimerListRelease: release timer obj c0194fa0!RTMP_TimerListRelease: release timer obj c019538c!RTMP_TimerListRelease: release timer obj c01956c8!RTMP_TimerListRelease: release timer obj c0195608!RTMP_TimerListRelease: release timer obj c0195638!RTMP_TimerListRelease: release timer obj c01986d0!RTMP_TimerListRelease: release timer obj c01982b4!RTMP_TimerListRelease: release timer obj c01986a0!RTMP_TimerListRelease: release timer obj c01989dc!RTMP_TimerListRelease: release timer obj c019891c!RTMP_TimerListRelease: release timer obj c019894c!RTMP_TimerListRelease: release timer obj c019b9e4!RTMP_TimerListRelease: release timer obj c019b5c8!RTMP_TimerListRelease: release timer obj c019b9b4!RTMP_TimerListRelease: release timer obj c019bcf0!RTMP_TimerListRelease: release timer obj c019bc30!RTMP_TimerListRelease: release timer obj c019bc60!RTMP_TimerListRelease: release timer obj c019ecf8!RTMP_TimerListRelease: release timer obj c019e8dc!RTMP_TimerListRelease: release timer obj c019ecc8!RTMP_TimerListRelease: release timer obj c019f004!RTMP_TimerListRelease: release timer obj c019ef44!RTMP_TimerListRelease: release timer obj c019ef74!RTMP_TimerListRelease: release timer obj c01a200c!RTMP_TimerListRelease: release timer obj c01a1bf0!RTMP_TimerListRelease: release timer obj c01a1fdc!RTMP_TimerListRelease: release timer obj c01a2318!RTMP_TimerListRelease: release timer obj c01a2258!RTMP_TimerListRelease: release timer obj c01a2288!RTMP_TimerListRelease: release timer obj c01a5320!RTMP_TimerListRelease: release timer obj c01a4f04!RTMP_TimerListRelease: release timer obj c01a52f0!RTMP_TimerListRelease: release timer obj c01a562c!RTMP_TimerListRelease: release timer obj c01a556c!RTMP_TimerListRelease: release timer obj c01a559c!RTMP_TimerListRelease: release timer obj c01a8634!RTMP_TimerListRelease: release timer obj c01a8218!RTMP_TimerListRelease: release timer obj c01a8604!RTMP_TimerListRelease: release timer obj c01a8940!RTMP_TimerListRelease: release timer obj c01a8880!RTMP_TimerListRelease: release timer obj c01a88b0!RTMP_TimerListRelease: release timer obj c01ab948!RTMP_TimerListRelease: release timer obj c01ab52c!RTMP_TimerListRelease: release timer obj c01ab918!RTMP_TimerListRelease: release timer obj c01abc54!RTMP_TimerListRelease: release timer obj c01abb94!RTMP_TimerListRelease: release timer obj c01abbc4!RTMP_TimerListRelease: release timer obj c021c974!RTMP_TimerListRelease: release timer obj c021c558!RTMP_TimerListRelease: release timer obj c021c944!RTMP_TimerListRelease: release timer obj c021cc80!RTMP_TimerListRelease: release timer obj c021c9a4!RTMP_TimerListRelease: release timer obj c021c9d4!RTMP_TimerListRelease: release timer obj c021ca04!RTMP_TimerListRelease: release timer obj c0240504!RTMP_TimerListRelease: release timer obj c0240620!RTMP_TimerListRelease: release timer obj c0240530!RTMP_TimerListRelease: release timer obj c021cff8!RTMP_TimerListRelease: release timer obj c02405b4!RTMP_TimerListRelease: release timer obj c019280c!RTMP_TimerListRelease: release timer obj c0195b20!RTMP_TimerListRelease: release timer obj c0198e34!RTMP_TimerListRelease: release timer obj c019c148!RTMP_TimerListRelease: release timer obj c019f45c!RTMP_TimerListRelease: release timer obj c01a2770!RTMP_TimerListRelease: release timer obj c01a5a84!RTMP_TimerListRelease: release timer obj c01a8d98!RTMP_TimerListRelease: release timer obj c021ccfc!RTMP_TimerListRelease: release timer obj c0195710!RTMP_TimerListRelease: release timer obj c019573c!RTMP_TimerListRelease: release timer obj c0198a24!RTMP_TimerListRelease: release timer obj c0198a50!RTMP_TimerListRelease: release timer obj c019bd38!RTMP_TimerListRelease: release timer obj c019bd64!RTMP_TimerListRelease: release timer obj c019f04c!RTMP_TimerListRelease: release timer obj c019f078!RTMP_TimerListRelease: release timer obj c01a2360!RTMP_TimerListRelease: release timer obj c01a238c!RTMP_TimerListRelease: release timer obj c01a5674!RTMP_TimerListRelease: release timer obj c01a56a0!RTMP_TimerListRelease: release timer obj c01a8988!RTMP_TimerListRelease: release timer obj c01a89b4!RTMP_TimerListRelease: release timer obj c01abc9c!RTMP_TimerListRelease: release timer obj c01abcc8!RTMP_TimerListRelease: release timer obj c0226390!@@@ RTMPDrvClose: go to ed_monitor_exit()!!@@@ ed_monitor_exit : ===>@@@ ed_monitor_exit : /proc/tplink/led_wlan_5G[ oal_wlan_ra_closeVap ] cmd: killall -q wscd_5G[ oal_wlan_ra_closeVap ] cmd: killall -q -SIGINT rtinicapd[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice rai0 entered promiscuous mode0 rai0[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice apclii0 entered promiscuous mode0 apclii0[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice rai2 entered promiscuous mode0 rai2[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice rai3 entered promiscuous mode0 rai3[ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice rai4 entered promiscuous mode0 rai4[ wlan_handleL2Desc ] 2401: br0[ oal_br_addIndevice rai1 entered promiscuous modetfIntoBridge ] cmd: brctl addif br0 rai1wlNetlinkTool is already there.sendto: No such file or directorypid 786 send 2030 error[ oal_startUPnP ] cmd: upnpd -L br0 -W eth0.2 -en 1 -nat 0 -port 80 -url \" -link.com\" -ma \"TP-Link\" -mn \"Archer_C5\" -mv \"4.0\" -desc \"AC1200 Wireless Dual Band Gigabit Router \" &[ oal_ovpn_createDir ] cmd: mkdir /var/openvpn[ oal_ovpn_createDir ] cmd: chmod 777 /var/openvpn[ oal_ovpn_createDir ] cmd: mkdir /var/easy-rsa/[ oal_ovpn_createDir ] cmd: chmod 777 /var/easy-rsa/[ oal_ovpn_createDir ] cmd: mkdir /var/easy-rsa/keys/[ oal_ovpn_createDir ] cmd: chmod 700 /var/easy-rsa/keys/[ oal_ovpn_setupTunMod ] cmd: insmod /lib/modules/kmdir/kernel/drivers/net/tun.kotun: Universal TUN/TAP device driver, 1.6tun: (C) 1999-2004 Max Krasnyansky [ oal_pvpn_setupNeededMod ] cmd: insmod /lib/modules/kmdir/kernel/drivers/net/ppp_mppe.koinsmod: can't insert '/lib/modules/kmdir/kernel/drivers/net/ppp_mppe.ko': No such file or directory[ oal_startDhcps ] cmd: dhcpd /var/tmp/dconf/udhcpd.conf[ oal_lan6_startDhcp6s ] cmd: dhcp6s -c /var/tmp/dconf/dhcp6s_br0.conf -P /var/run/dhcp6s_br0.pid br0 &[ oal_lan6_startRadvd ] cmd: radvd -C /var/tmp/dconf/radvd_br0.conf -p /var/run/radvd_br0.pid &[ oal_snmp_updateCfg ] cmd: iptables -t filter -D ACL -p udp --dport 161 -j ACCEPTiptables: Bad rule (does a matching rule exist in that chain).iptables: Bad rule (does a matching rule exist in that chain).[ oal_startSnmp ] cmd: snmpd -f /var/tmp/dconf/snmpd.confsh: can't create /proc/sys/kernel/core_pattern: nonexistent directory[ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.2radvd startingbrctl: bridge br0: Invalid argument[ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.2brctl: bridge br0: Invalid argument[ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6][ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up[ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down[ util_enFuncQueue ] 099: Function queue not support RDP_OPT_ADD_OBJ operation[ util_enFuncQueue ] 099: Function queue not support RDP_OPT_ADD_OBJ operationset eth status, stack = 2 [1 1 0 0 0 0][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5][ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6][ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up[ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down[ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down[ oal_intf_setIfMac ] cmd: ifconfig eth0.2 down[ oal_intf_setIfMac ] cmd: ifconfig eth0.2 hw ether D8:0D:17:xx:xx:xx up[ oal_intf_enableIntf ] cmd: ifconfig eth0.2 up[ oal_ipt_setDDoSRules ] cmd: iptables -F FIREWALL_DDOS[ ddos_clearAll ] cmd: rm -f /var/tmp/dosHost[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_ftp.ko[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_ftp.ko[ oal_openAlg ] cmd: iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 500 -j DROPiptables: Bad rule (does a matching rule exist in that chain).[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_proto_gre.koinsmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_proto_gre.ko': File exists[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_pptp.koinsmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_pptp.ko': File exists[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_pptp.ko[ oal_openAlg ] cmd: iptables -D FORWARD_VPN_PASSTHROUGH -p tcp --dport 1723 -j DROPiptables: Bad rule (does a matching rule exist in that chain).[ oal_openAlg ] cmd: iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 1701 -j DROPiptables: Bad rule (does a matching rule exist in that chain).[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_tftp.ko[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_tftp.ko[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_h323.ko[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_h323.ko[ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_sip.ko[ setupModules ] cmd: insmod /lRalink HW NAT Module Enabledib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_sip.ko[ oal_wan_HWNat_enable ] cmd: insmod /lib/modules/kmdir/kernel/net/nat/hw_nat/hw_nat.ko[ oal_initIp6FirewallObj ] cmd: ip6tables -F[ oal_initIp6FirewallObj ] cmd: ip6tables -X[ oal_initIp6FirewallObj ] cmd: ip6tables -P INPUT DROP[ oal_initIp6FirewallObj ] cmd: ip6tables -P FORWARD DROP[ oal_initIp6FirewallObj ] cmd: ip6tables -P OUTPUT ACCEPT[ oal_initIp6FirewallObj ] cmd: ip6tables -N ACLV6[ oal_initIp6FirewallObj ] cmd: ip6tables -N FIREWALL[ oal_initIp6FirewallObj ] cmd: ip6tables -N FWRULE[ oal_initIp6FirewallObj ] cmd: ip6tables -N INPUT_FIREWALL[ oal_initIp6FirewallObj ] cmd: ip6tables -N INPUT_FWRULE[ oal_initIp6FirewallObj ] cmd: ip6tables -N PARENTCTL[ oal_initIp6FirewallObj ] cmd: ip6tables -N PCRULE[ oal_initIp6FirewallObj ] cmd: ip6tables -N PCDROP[ oal_initIp6FirewallObj ] cmd: ip6tables -N INPUT_PARENTCTL[ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -i lo -p ALL -j ACCEPT -m comment --comment \"loop back\"[ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT[ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -j ACLV6[ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -p icmpv6 ! --icmpv6-type echo-request -j ACCEPT[ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -p udp ! -i br+ --sport 547 --dport 546 -j ACCEPT[ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -p udp -i br+ --sport 546 --dport 547 -j ACCEPT[ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -p udp --sport 521 --dport 521 -j ACCEPT[ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -j INPUT_PARENTCTL[ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -j INPUT_FIREWALL[ oal_initIp6FirewallObj ] cmd: ip6tables -A FORWARD -o br+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT[ oal_initIp6FirewallObj ] cmd: ip6tables -A FORWARD -j PARENTCTL[ oal_initIp6FirewallObj ] cmd: ip6tables -A FORWARD -j FIREWALL[ oal_initIp6FirewallObj ] cmd: ip6tables -A FORWARD -i br+ -j ACCEPT[ oal_ipt6_setLanHttpPort ] cmd: ip6tables -A INPUT -i br+ -p tcp --dport 80 -j ACCEPT[ oal_fw6_setFwEnabeld ] cmd: ip6tables -D FIREWALL -j ACCEPTip6tables: Bad rule (does a matching rule exist in that chain).[ oal_fw6_setFwEnabeld ] cmd: ip6tables -F FIREWALL[ oal_fw6_setSpiFirewall ] cmd: ip6tables -t filter -D FORWARD ! -i br+ -m conntrack --ctstate NEW -j ACCEPTip6tables: Bad rule (does a matching rule exist in that chain).[ oal_initFirewallObj ] cmd: ebtables -N FIREWALL[ oal_fw_setSpiFirewall ] cmd: iptables -t filter -D FORWARD ! -i br+ -m conntrack --ctstate NEW -j ACCEPTiptables: Bad rule (does a matching rule exist in that chain).[ rsl_setStorageServiceObj ] 1394: mountFlag is 3,We start usb server[ oal_killDlnaMediaSeverProcess ] cmd: killall usharekillall: ushare: no process killeduShare (version 1.1a), a lightweight UPnP A/V and DLNA Media Server.Benjamin Zores (C) 2005-2007, for GeeXboX Team.See for updates.[ oal_ipt_setWanPort ] cmd: iptables -t filter -D INPUT -p tcp --dport 21 -j ACCEPTiptables: Bad rule (does a matching rule exist in that chain).[ oal_ipt_setWanPort ] cmd: iptables -t nat -D PREROUTING -p tcp --dport 21 -j ACCEPTiptables: Bad rule (does a matching rule exist in that chain).[ oal_ipt_setWanPort ] cmd: ip6tables -t filter -D ACLV6 -p tcp --dport 21 -j ACCEPTip6tables: Bad rule (does a matching rule exist in that chain).[ oal_ipt_setAclRules ] cmd: iptables -t filter -A ACL -i br+ -p icmp -j ACCEPT[ oal_ipt_setAclRules ] cmd: ip6tables -t filter -A ACLV6 -i br+ -p icmpv6 --icmpv6-type echo-request -j ACCEPT[ oal_sys_enablePowerLed ] cmd: echo 1 > /proc/tplink/led_sys[ cos_init ] cmd: echo 3 > /proc/sys/vm/drop_cachesFound 0 files and subdirectories.open DNS error: No such file or directory[ oal_sys_unsetTZ ] cmd: echo \"\" > /etc/TZ[ oal_sys_unsetTZ ] cmd: echo \"\" > /etc/TZ^@SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) dump-ftrace-buffer(z)qSysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) dump-ftrace-buffer(z)^@SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) dump-ftrace-buffer(z)^@ostarting pid 787, tty '': '/sbin/getty -L ttyS1 115200 vt100'Archer C5 login: 153554b96e
https://www.fakenetai.com/forum/business-forum/pc-game-captain-claw-rar-fix-download